Applications and Features
Material: SS304, SS316L, Ti, Hastelloy-C, PTFE lined or other materials
Applications:It is widely applied in the industries, such as pharmaceutical,
chemical engineering, agrochemical, food, etc. It can realize the continuous operation
in vacuum, and even more suitable for producing sterile and poisonous products.
Process and structure
➤Filtering stage: The separation of filter cake and mother liquid. The thickness of
filter cake can reach 500mm.
➤Washing stage: Further purification of filter cake, rinse and dehydration of
mother liquid remained. Mix the lotion and the filter cake via up and down of agitator
to make the filter cake slurry finally, then the filter cake can get the full wash.
➤Drying stage: Dehydrating and drying the filter cake. Agitator will scrape filter
cake loose by layers while the sidewall; the bottom of filter plate and agitator will
heat the filter cake at the same time. Moreover, the vacuum inside the equipment will
accelerate the evaporating speed; the entered hot nitrogen will take away the damp
and accelerate the speed of desiccation.
▾Bottom plate structure: :SUS304/316L
▾Filter plate: sintered plate/filter cloth (normally 5~50 um)
▾Dead angle of filter cloth: 25mm single side
▾Flatness degree of single plate: ±1mm/m
Main Characteristics
➤“All in One”
All the steps, including filtering, washing and drying, can be completed in one set of
equipment. Drying treatment can be realized due to the heating jacket on the
equipment.
➤Continuous operation
As filtering and drying is operated in one set of equipment, so there is no need to deal
with wet filter cake. The final dry products can be transferred to weighing, packaging
and other sections by machines.
➤Saving labor cost
Non-technical staffs only need to take simple training of operation. Technicians do
not have to monitor the process all the time,including opening, closing, automatic
feeding and discharging.
➤Proper cleaning
Agitated Nutsche Filter Dryer (filtering, washing and drying) sprays and stirs
automatically, so filter cake can be properly cleaned while the amount of sewage and
the cost of wastewater treatment can be reduced.
➤Clean Production
The dust catcher on the multifunctional filtering and drying equipment can collect
dust after drying process, which meets the requirement of clean production.
Technical parameters
Specification Capacity(m³) Filtering area(㎡） Electrical motor power(kw)
φ800 0.6m³ 0.5 ㎡ 4kw
φ1000 1.2m³ 0.8 ㎡ 5.5kw
φ1200 1.5m³ 1 ㎡ 5.5kw
φ2000 4m³ 3 ㎡ 11kw
φ3000 10.2m³ 7 ㎡ 22kw
φ4000 22m³ 13 ㎡ 45kw
...
φ4600 30m³ 16 ㎡ 75kw
Our Advantage
New advanced airtight technology, vacuum ≤ 50PA，Improve the quality of user products, can be
used in the production of aseptic grade products
Quick open chassis，The maximum size is 3000mm diameter fast opening chassis，Save time
and manpower, safe operation, simple and easy
Design of combined outlet，More reliable sealing performance, high safety, even power failure
will not leak
High precision synchronization of stirring, chassis lifting, chassis locking，Improve the
transmission precision of the equipment, increase the service life and safety reliability
PLC and DCS automatic control，Save time and manpower, safe operation, simple and easy
On - line monitoring of main shaft bellows，Detect the leakage at the first time, and take
corresponding measures to reduce the loss of materials
On line cleaning of vacuum filter, complete on line cleaning of highest parts of equipment with
minimum cleaning fluid
European technology, China's earliest three-in-one manufacturer，Reliable performance, 20
years of experience, has been produced no less than 300
Custom Service
➤Our Products for pharmaceutical and chemical industries
1. Multifunctional “Three in One” (filtering, washing and drying) 2. Crystallizing
Tank, Reaction Kettle 3. Sterile double-cone dryer 4. Rake Vacuum Dryer/Paddle
Vacuum Dryer 5. Plate-fin Heat Exchanger
➤Our advantage
Special Equipment: Pressure Equipment, Equipment made of anti-corrosion
materials, Sterile Equipment
Equipment made of anti-corrosion materials includes: anti-corrosion lining
plastic/ PTFE/ enamel, etc.
Ti/HC22/Mone11 2. Customized Design: Double-Cone in 20L-20m³ Rake Dryer
(with mechanical seal) in 16 m³ DN300-DN600 “Three in One” 3. Design/Calculation
Software
➤Scope of business
1. On-site Inspection 2. Technical Innovation Plan for Equipment Technical
Improvement Plan for Equipment’s Structure Optimization Fast and Effective
Solution to Equipment Malfunctions Highly Efficient and Precise On-site
Construction Service Commitment to a Deadline in Customization A Full Range of
long-term on-site technical maintenance service 3. Maintenance 4. Technical
Solutions 5. On-site Testing and Training 6. Spare Parts
Applications and Features
Material: SS304, SS316L, Ti, Hastelloy-C, PTFE lined or other materials
Applications:It is widely applied in the industries, such as pharmaceutical,
chemical engineering, agrochemical, food, etc. It can realize the continuous operation
in vacuum, and even more suitable for producing sterile and poisonous products.
Process and structure
➤Filtering stage: The separation of filter cake and mother liquid. The thickness of
filter cake can reach 500mm.
➤Washing stage: Further purification of filter cake, rinse and dehydration of
mother liquid remained. Mix the lotion and the filter cake via up and down of agitator
to make the filter cake slurry finally, then the filter cake can get the full wash.
➤Drying stage: Dehydrating and drying the filter cake. Agitator will scrape filter
cake loose by layers while the sidewall; the bottom of filter plate and agitator will
heat the filter cake at the same time. Moreover, the vacuum inside the equipment will
accelerate the evaporating speed; the entered hot nitrogen will take away the damp
and accelerate the speed of desiccation.
▾Bottom plate structure: :SUS304/316L
▾Filter plate: sintered plate/filter cloth (normally 5~50 um)
▾Dead angle of filter cloth: 25mm single side
▾Flatness degree of single plate: ±1mm/m
Main Characteristics
➤“All in One”
All the steps, including filtering, washing and drying, can be completed in one set of
equipment. Drying treatment can be realized due to the heating jacket on the
equipment.
➤Continuous operation
As filtering and drying is operated in one set of equipment, so there is no need to deal
with wet filter cake. The final dry products can be transferred to weighing, packaging
and other sections by machines.
➤Saving labor cost
Non-technical staffs only need to take simple training of operation. Technicians do
not have to monitor the process all the time,including opening, closing, automatic
feeding and discharging.
➤Proper cleaning
Agitated Nutsche Filter Dryer (filtering, washing and drying) sprays and stirs
automatically, so filter cake can be properly cleaned while the amount of sewage and
the cost of wastewater treatment can be reduced.
➤Clean Production
The dust catcher on the multifunctional filtering and drying equipment can collect
dust after drying process, which meets the requirement of clean production.
Technical parameters
Specification Capacity(m³) Filtering area(㎡） Electrical motor power(kw)
φ800 0.6m³ 0.5 ㎡ 4kw
φ1000 1.2m³ 0.8 ㎡ 5.5kw
φ1200 1.5m³ 1 ㎡ 5.5kw
φ2000 4m³ 3 ㎡ 11kw
φ3000 10.2m³ 7 ㎡ 22kw
φ4000 22m³ 13 ㎡ 45kw
...
φ4600 30m³ 16 ㎡ 75kw
Our Advantage
New advanced airtight technology, vacuum ≤ 50PA，Improve the quality of user products, can be
used in the production of aseptic grade products
Quick open chassis，The maximum size is 3000mm diameter fast opening chassis，Save time
and manpower, safe operation, simple and easy
Design of combined outlet，More reliable sealing performance, high safety, even power failure
will not leak
High precision synchronization of stirring, chassis lifting, chassis locking，Improve the
transmission precision of the equipment, increase the service life and safety reliability
PLC and DCS automatic control，Save time and manpower, safe operation, simple and easy
On - line monitoring of main shaft bellows，Detect the leakage at the first time, and take
corresponding measures to reduce the loss of materials
On line cleaning of vacuum filter, complete on line cleaning of highest parts of equipment with
minimum cleaning fluid
European technology, China's earliest three-in-one manufacturer，Reliable performance, 20
years of experience, has been produced no less than 300
Custom Service
➤Our Products for pharmaceutical and chemical industries
1. Multifunctional “Three in One” (filtering, washing and drying) 2. Crystallizing
Tank, Reaction Kettle 3. Sterile double-cone dryer 4. Rake Vacuum Dryer/Paddle
Vacuum Dryer 5. Plate-fin Heat Exchanger
➤Our advantage
Special Equipment: Pressure Equipment, Equipment made of anti-corrosion
materials, Sterile Equipment
Equipment made of anti-corrosion materials includes: anti-corrosion lining
plastic/ PTFE/ enamel, etc.
Ti/HC22/Mone11 2. Customized Design: Double-Cone in 20L-20m³ Rake Dryer
(with mechanical seal) in 16 m³ DN300-DN600 “Three in One” 3. Design/Calculation
Software
➤Scope of business
1. On-site Inspection 2. Technical Innovation Plan for Equipment Technical
Improvement Plan for Equipment’s Structure Optimization Fast and Effective
Solution to Equipment Malfunctions Highly Efficient and Precise On-site
Construction Service Commitment to a Deadline in Customization A Full Range of
long-term on-site technical maintenance service 3. Maintenance 4. Technical
Solutions 5. On-site Testing and Training 6. Spare Parts
